- Product Specs
- Handlebar Definitions
The Patented Design, Carlini's famous Gangster Ape 1.25" available for 2014+ Street Glide/Ultra for throttle by wire applications. Features the innovative forward-tilting style, found in the original Gangster Ape, for that tough pushed forward look.
This handlebar comes stepped down for a stock harley 1" one piece riser clamp, and is also equipped for Throttle by Wire (electronic throttle).
No other vendor makes the Gangster Ape - Patented Design! # D604212
Made and manufactured in the USA!
- Thickness: 1.25" in.
- Width: 36" in.
- Pullback (depth): 7" in.
- Rise (height): 16" in.
-Center Width: 14.5" in.
- This handle bar is reduced to 1" (stepped) at the mounting surface. Step down is 5 1/8" in. wide.
- Grip sections taper to 1" diameter to be used with 1" stock hand controls and grips.
- Bars are Pre-drilled for internal wiring.
- Handlebars are equipped for Throttle By Wire (Electronic Throttle)
**STEPPED BARS REQUIRE A 1 PIECE TOP CLAMP**
Width - The length between the left and the right ends of the handlebar.
Rise (height) - The length from the base of the handlebar to the top.
Pullback (depth) - Viewing from the side, the distance from the front to the back end of the handlebar grips.
Thickness - the diameter of the handlebar.
Center Width - The width from center of bend to center of bend at the base of the bar, or for sharp cornered bars from outside of the corner to outside of corner.