Evil Ape 12'' Stepped Chrome Throttle By Wire

  • Description
  • Product Specs
  • Handlebar Definitions
The Evil Ape features the same unique bend in the uprights as our Gangster Ape but with sharp corners. 
This handlebar comes stepped down for a stock harley 1" riser clamp, and is also equipped for Throttle by Wire (electronic throttle).
This product is only available on No other online seller carries this product.
Patented Design! # D629343 - This is a Carlini Patented Design. Made and manufactured in the USA!
*** photo shown above is not the actual 12" bar. Shown above is the 14" Evil Ape. The 12" bar will be almost identical in every way except 2 inches shorter****
- Thickness: 1.25" in. 
- Rise (height): 12" in.
- Width: 33" in. 
- Base Width: 11.75" in.
- Pullback (depth): 7" in.
- This handle bar is reduced to 1" (stepped) at the mounting surface. Step down is 5 1/8" in. wide.
- Grip sections taper to 1" diameter to be used with 1" hand controls and grips. 
- Bars are Pre-drilled for internal wiring.
- Handlebars are equipped for Throttle By Wire (Electronic Throttle)


Width - The length between the left and the right ends of the handlebar.

Rise (height) - The length from the base of the handlebar to the top.

Pullback (depth) - Viewing from the side, the distance from the front to the back end of the handlebar grips.

Thickness - the diameter of the handlebar.